Maintenance - Tools & Manuals

Available

Loctite black silicone

Filling gap up to 5mm. Temperature resistance -55° to 250°

€20.95

Available

Tyre-lever

 professional 38cm long

€19.95

Available

Fuel filter

€5.95

Available

Chain cleaner tool

This brush enables you to clean drive chains (grease build-up, dirt, etc.) with ease. Simply feed the chain through the brush head, and its U-shaped design cleans all...

€14.95

Available

Loctite Hand cleaner

€24.95

Available

Chain link wrench 415 to 530 link size

Chain 428 (Link size 415 to 530)

€25.95

Out-of-Stock

Aluminium Professional Varnish 250ml

Need help protecting aluminum, light alloys and yellow metals for the long term? Restom AluFilm 4040  is a one-component, glossy and colorless epoxy varnish for the...

€27.95

Available

Metallic Fuel filter

Can be opened for cleaning

€18.95

Available

Tyre pressure gauge

Pocket needle pressure gauge Graduation: 0.15 to 4 bar (2 to 60 PSI)

€24.95

Available

Resin and paint stripper 750ml

Need help removing paint, varnish or other coatings?  Restom DKPANT 4031  is a paint stripper for removing most paints and varnishes. Effective on polyurethane, glycerol,...

€22.95

Available

Fuel line X 0.8 meter

int diam 6 to 10 mm

€5.75

Available

Alloy or metalic tank restoration 2 to 5 liters tanks

This kit allows you to put a layer of specific polyester resin inside your old tank in case of drain . A grease remover and a rust remoover are also supplied with this kit....

€36.95

Available

Yamaha and others lot of 5 Fuel clips

€9.95

New

Available

Stainless steel clamp (25 to 40mm)

Stainless steel clamp, suitable for efficiently clamping intake pipes and/or airbox sleeves. Clamping range: 25 to 40mm

€3.45

Available

Alloy or metalic tank restoration 2 to 15 liters tanks

This kit allows you to put a layer of specific polyester resin inside your old tank in case of drain . A grease remover and a rust remoover are also supplied with this kit....

€54.95

Available

Flywheel extractor Bultaco Sherpa (33mm x 150)

Also suitable for all motorcycles with Femsa 33mm ignition and some rare Motoplat 33mm ignitions which are normally 30x150.

€18.95

New

Available

Stainless steel clamp (32 to 50mm)

Stainless steel clamp, suitable for efficiently clamping intake pipes and/or airbox sleeves. Clamping range: 32 to 50mm

€3.95

Available

Poly tank restoration 2 to 5 liters tanks

Restom KitPoly  is THE COMPLETE TREATMENT for the treatment of FIBER AND RESIN tanks, whether or not they have already contained fuel. ⚠  Not suitable for polypropylene...

€36.95

Available

Flywheel extractor Fantic 125, 200 & 240 (26mm x 150)

Also for Montesa Cota 307 & 311

€15.95

New

Available

Stainless steel clamp (40 to 60mm)

Stainless steel clamp, suitable for efficiently clamping intake pipes and/or airbox sleeves. Clamping range: 40 to 60mm

€4.25

Out-of-Stock

Poly tank restoration kit for 5 to 15 liters tanks

Restom KitPoly  is THE COMPLETE TREATMENT for the treatment of FIBER AND RESIN tanks, whether or not they have already contained fuel. ⚠  Not suitable for polypropylene...

€54.95

Available

Flywheel extractor Fantic 300 - 32x125

Also OK for Section 250 (212cc) 243/245/247/249/300/301/303/307/309/kroo212 et 250 section 250 cc

€37.70

Available

Flywheel extractor HONDA TLR 16x150

€16.70

Available

High temperature black paint 400ML

Mat black plastic varnish paint temperature resistant up to +400°C. Weatherproof and scrtch-. For metal, plastic, wood glass and paperresistant.

€20.95

Available

brake cleaner WASH MOTIP spray 500ml

.

€6.95

Available

Flywheel extractor Montesa (30mm x 150)

Motoplat ignitions 30x1.5mm

€18.95

Available

Universal air filter moss

Bi density moss 33 X 28 X 1cm. Allow you to cut at least two air filter moss depending of the bike model.

€9.95

Available

Bultaco air filter moss

Bultaco Lobito, Campera and Sammy Miller models with aluminum foam airbox. High width: 11.5 mm Bottom width: 6.5mm Length: 16.4mm Thickness: 1.4mm

€5.95

Available

Flywheel extractor Ossa (27mm x 125)

MONTESA Capra 125 and all Motoplat ignition motorcycles, diameter 27mm x 1.25mm. Also suitable for electronic ignitions sold at France Trial Classic.

€16.95

Available

Corburator cleaner 500ml

.

€19.95

Available

BULTACO Alpina air filter foam with sleeve

In one piece, the ultimate dust weapon Air box sleeve with air filter for Bultaco Alpina (models 165 to 213) Dimensions : - Carburetor side 44mm

€32.95

Available

Fast acting degreaser (500ml)

This fast acting, solvent based solution, quickly removes grease, oil, dirt and grime without leaving any residue.

€14.75

Available

Flywheel extractor Swm 125 Trial (35mm x 150)

€28.95

Available

BULTACO air filter foam with sleeve (Mikuni)

From one part, the absolute weapon for dust For Bultaco Sherpa with Mikuni Carburetor (diameter 44mm)

€29.95

Available

Yamaha Flywheel extractor extractor (27mm x 100)

YAMAHA TY 50, 80, 125 & 175 & 250 & Monoshock N 250

€16.95

Available

BULTACO air filter foam with sleeve (Bing)

From one part, the absolute weapon for dust For Bultaco Sherpa with Bing Carburetor (diameter 50mm)

€28.95

Available

Flywheel extractor diam 19 threat of srew 100

€15.95

Available

BULTACO air filter foam with sleeve (Amal)

From one part, the absolute weapon for dust For Bultaco Sherpa with Amal Carburetor (diameter 52mm)

€28.95

Available

Belgom Alu 250ml

.

€15.95

Available

Flywheel extractor diam 20 threat of srew 100

€15.95