Electrical (lights & accessories)

Available

Universal turn signal pair

Pair of indicators delivered with bulbs operating in 6 or 12V. Chromed plastic body with metal fixing. Diameter 4.5cm discreet and respecting the vintage look. Compatible...

€29.70

Out-of-Stock

Turn signal fixing brackets pair

Turn signal pair of fixing brackets for forks (30 to 45mm diameter)

€12.70

Available

Turn signal 6/12v bulb

Compatible with the pair of universal turn signal pair sold on the site.

€1.70

Available

Light 12 volts régulator

To be pluged between the front and rear lights. Have to be screwed on the frame (earth)

€28.95

Available

Vintage Auteroche style front light

Sold without bulb, choose according to the voltage required: #E131 for 6V (35/35W) 20mm base #E132 for 12V (35/35w) 20mm base

€108.95

Available

Vintage style front light with switch button ( Diam 13cm )

This is a low-priced headlamp with a respectable finish, without reaching the quality of the Auteroche headlamp, of course. Single code or headlamp connection, sold without...

€29.95

Out-of-Stock

GONELI Front light trial plate white

Sold without bulb, choose according to the voltage required: #E124 for 6V (21/5W) 15mm base #E134 for 12V (21/5w) 15mm base

€44.75

Out-of-Stock

GONELI Front light trial plate red

Sold without bulb, choose according to the voltage required: #E124 for 6V (21/5W) 15mm base #E134 for 12V (21/5w) 15mm base

€44.70

Available

Universal front light holders (pair)

Bultaco, Ossa, Montesa, Yamaha, Fantic etc Fork diameter 28 to 31 mm

€19.95

Available

Universal front light holders (pair)

Bultaco, Ossa, Montesa, Yamaha, Fantic etc Fork diameter 35mm

€19.95

Available

Ossa Front light fixing brackets pair

€19.95

Available

Universal rear light

This is a universal rear light with brake light. It comes with a 12V bulb (23/8W). Here are our compatible bulbs: #E124  for 6V (21/5W) 15mm base #E134...

€19.95

Available

Rear light 12V with rear brake light

This is a universal rear light with brake light. It comes with a 12V bulb (23/8W). Here's a spare bulb model: #E129 for 12V (23/8W) 15mm base For your 6V...

€19.95

Available

Universal rear light

Here's a rear light universal model, but close to the original Bultaco, Ossa and Montesa parts (position and brake lights). Sold without bulb, here's a compatible shuttle...

€19.95

Available

Rubber rear number plate

Bultaco, Ossa, Montesa

€13.95

Available

MONTESA number plate support

Bultaco, Ossa, Montesa

€26.70

Available

MONTESA 247 number plate support

Rubber license plate holder.

€17.95

Out-of-Stock

Universal rear light with rear number plate

Here's a rear light with a rubber holder for your license plate. A universal model, but close to the original Bultaco, Ossa and Montesa parts (position and brake lights)....

€32.95

Available

Yamaha TY 125 & 175 rear light exact reproduction of the original rear light

This taillight is a faithful reproduction of the Yamaha TY 125 and 175 model. Supplied with a 6V (21/3W) bulb, here are our compatible bulbs: #E124 for 6V...

€14.95

Available

Yamaha TY 125 & 175 rear light exact reproduction of the original rear light

Here's a taillight with a rubber holder for your license plate. Faithful reproduction of the Yamaha TY 125 and 175 model. Supplied with a 6V (21/3W) bulb, here are our...

€17.95

Available

Light (Hi & Low) and engine switch

€32.95

Available

Light switch one position

€23.95

Available

Rear universel brake light contactor

€13.90

Available

Yamaha TY 125 & 175 rear stop light swith

Handelbar

€34.95

Available

Yamaha TY 250 Mono 59N rear stop light swith

Handelbar

€32.95

Available

Kill button

One of the two wires to the entrance of the HT coil, the other to the earth

€15.95

Available

Kill button On / Off

.

€19.95

Available

Kill button vintage

Black wire to the entrance of the HT coil, the other to the earth if you handlebar is not already... If you handlebar is already earth connected, you will not be obliged to use...

€14.95

Available

Clip Kill button

One of the two wires to the entrance of the HT coil, the other to the earth

€19.95

Available

Magnetic kill button

One of the two wires to the entrance of the HT coil, the other to the earth

€34.95

Available

Magnetic kill button magnet

€12.95

Available

12 Volts horn

€23.95

Available

Yamaha TY 125, 175 (Type 541) and 250 twin shock absorbers rubber key switch

Rubber key switch for Yamaha TY 125, 175 (type 541) and TY 250 twin shocks. TY model with key switch on handlebars, not under tank, 3D printed part. Unit price.

€18.95

Available

Yamaha TY 50 to 250 twinshock horn (6V)

Fixing plate for TY 50 & 80 Europe. For other models, must be modified ( bent)

€45.95

Available

YAMAHA TY 125 to 250 twinshock, head lamp circlip

€7.95

Available

YAMAHA TY 50 and 125 to 250 twinshock, head lamp rim

Chappy head lamp rim, goes well on TY ones.

€37.95

Available

Yamaha TY 125, 175 & 250 twinshock exhaust / cylinder stud nut (and tail light attachment)

Nut of: - cylinder / exhaust stud - rear light attachment See the part list in additional photo. Unit price.

€3.95

Available

Yamaha TY 50, 80, 125 et 250 spring washer

Grower washer for fixing the air box, shock absorbers, front & rear mudguards, oil tank, tail light, horn, seat brackets and exhaust / cylinder stud See location on...

€0.95

Available

Yamaha TY 125 to 250 twin-shock Central rubber blinker

3D printed part. Original Yamaha TY 125 to 250 flasher mounting rubber.

€12.95

Available

Yamaha TY 125 to 250 (Twin shoks) Turn signal center lower rubber

3D printed part. Rubber protection for Yamaha TY 125 to 250 flasher cables.

€12.95