Tools

Available

Compact 16, 18 & 21mm plug spanner

- Spark plug wrench 16, 18 and 21mm - Length 72mm

€7.95

Available

Compact 21mm plug spanner

21mm compact spark plug wrench

€6.95

Available

Compact ratchet 21mm plug spanner

€18.95

Available

Spark plug metalic brush

€5.95

Available

Torque wrench

For 3/8 tools. 10 to 80 Nm = 88.5 to 708 lb-in. Comes with French, English and Deutch user manual

€81.95

Available

Metric thread restoring file

€74.95

Available

Impact driver set

€58.95

Available

Clutch and fly wheel wrench

Locking wrench for holding the clutch nut, flywheel, gearbox output pinion or any other gear while tightening/loosening the nut. - Maximum opening: 130mm

€32.95

Available

HONDA clutch plate bolt key

€24.95

Available

YAMAHA TY special wrench to open the central cases

125 to 250 twinshock

€84.95

Available

Spokes wrench

Six spokes nipples sizes, goes for all classic Trial bikes

€20.95

Available

Tyre-lever

 professional 38cm long

€19.95

Available

Chain cleaner tool

This brush enables you to clean drive chains (grease build-up, dirt, etc.) with ease. Simply feed the chain through the brush head, and its U-shaped design cleans all...

€14.95

Available

Chain link wrench 415 to 530 link size

Chain 428 (Link size 415 to 530)

€25.95

Available

Tyre pressure gauge

Pocket needle pressure gauge Graduation: 0.15 to 4 bar (2 to 60 PSI)

€24.95

Available

Flywheel extractor Bultaco Sherpa (33mm x 150)

Also suitable for all motorcycles with Femsa 33mm ignition and some rare Motoplat 33mm ignitions which are normally 30x150.

€18.95

Available

Flywheel extractor Fantic 125, 200 & 240 (26mm x 150)

Also for Montesa Cota 307 & 311

€15.95

Available

Flywheel extractor Fantic 300 - 32x125

Also OK for Section 250 (212cc) 243/245/247/249/300/301/303/307/309/kroo212 et 250 section 250 cc

€37.70

Available

Flywheel extractor HONDA TLR 16x150

€16.70

Available

Flywheel extractor Montesa (30mm x 150)

Motoplat ignitions 30x1.5mm

€18.95

Available

Flywheel extractor Ossa (27mm x 125)

MONTESA Capra 125 and all Motoplat ignition motorcycles, diameter 27mm x 1.25mm. Also suitable for electronic ignitions sold at France Trial Classic.

€16.95

Available

Flywheel extractor Swm 125 Trial (35mm x 150)

€28.95

Available

Yamaha Flywheel extractor extractor (27mm x 100)

YAMAHA TY 50, 80, 125 & 175 & 250 & Monoshock N 250

€16.95

Available

Flywheel extractor diam 19 threat of srew 100

€15.95

Available

Flywheel extractor diam 20 threat of srew 100

€15.95

Available

Flywheel extractor diam 24 threat of srew 100

€15.95

Available

Loctite Theadlocker

€12.95

Available

BULTACO 8x50 mm screw

€0.75

Available

BULTACO 10x50 mm screw

€0.95

Available

BULTACO 12x60 mm screw

€1.45

Available

Pins assortment (555 pieces) all sizes

€29.95

Available

Pins assortment (150 pieces) all sizes

€41.95

Available

irclips assortment ( 285 pieces) all sizes

€64.95

Available

Clips type E assortment ( 300 pieces) all sizes

€41.95

Available

HONDA 125 TLR engine screw kit

High quality Stainless steel (A2) hex (Allen) screws. They will not rust. They are stronger than standard ones Left and right crank case covers and central housing.

€24.95

Available

YAMAHA TY 175 and Majesty 200 engine cases screw kit

High quality Stainless steel (A2) hex (Allen) screws. They will not rust. They are stronger than standard ones Left and right crank case covers

€12.95

Available

YAMAHA TY 250 & Majesty 250 & 320 twinshock, engine cases screw kit

High quality Stainless steel (A2) hex (Allen) screws. They will not rust. They are stronger than standard ones Left and right crank case covers

€13.75

Available

YAMAHA TY 250 monoshock, engine cases screw kit

High quality Stainless steel (A2) hex (Allen) screws. They will not rust. They are stronger than standard ones Left and right crank case covers

€11.95

Available

YAMAHA TY 125 & 175 engine central cases screw kit

€45.95

Available

YAMAHA TY 125 & 175 engine fixing kit (frame to engine)

€38.95